Lapse Rate
The lapse rate (Γ) is the vertical rate at which an atmospheric variable—most commonly temperature (T)—decreases with increasing geometric altitude (z) through a planetary atmosphere, defined with a negative sign so that cooling with height yields a positive value:.
The lapse rate (Γ) is the vertical rate at which an atmospheric variable—most commonly temperature (T)—decreases with increasing geometric altitude (z) through a planetary atmosphere, defined with a negative sign so that cooling with height yields a positive value:
Γ = −dT/dz
In the fundamentals of meteorology and atmospheric physics, two categories of lapse rate are distinguished: the Environmental Lapse Rate (ELR, Γe), which describes the actual vertical temperature profile of the ambient atmosphere at a given location and time (averaging 6.5 K/km (6.5 °C/km) across Earth's troposphere in the International Standard Atmosphere), and the Adiabatic Lapse Rates—the Dry Adiabatic Lapse Rate (DALR, Γd ≈ 9.8 K/km) and the Moist / Saturated Adiabatic Lapse Rate (MALR, Γm ≈ 4.0–9.5 K/km)—which govern the cooling rate of an air parcel displaced vertically without heat exchange. Comparing Γe against Γd and Γm determines static stability, controlling whether displaced parcels are suppressed or accelerate upward in buoyant convection modified by water vapor condensation and latent heat release, while shifts in Γe under warming drive the radiative lapse-rate climate feedback and Arctic amplification.
Thermodynamic Derivation of Adiabatic Lapse Rates
The Dry Adiabatic Lapse Rate (DALR) and Potential Temperature
When an unsaturated parcel of dry air ascends, it expands adiabatically (δq = 0) into lower ambient pressure (p). By the First Law of Thermodynamics in specific enthalpy form for an ideal gas (cp dT − α dp = δq, where cp is isobaric specific heat capacity and α = 1/ρ = RdT/p is specific volume), setting δq = 0 and substituting hydrostatic balance (dp = −ρ g dz) eliminates density ρ:
cp dT = −g dz ⇒ Γd = −(dT/dz)dry = g / cp
For dry terrestrial air (Rd = 287.05 J kg−1 K−1, cp = 1,004.6 J kg−1 K−1) and standard gravity (g = 9.80665 m/s2), the Dry Adiabatic Lapse Rate (DALR) is a constant:
Γd = 9.80665 / 1,004.6 = 0.00976 K/m ≈ 9.8 K/km (9.8 °C/km)
Every 1 km gain in gravitational potential energy (g Δz = 9,807 J/kg) is balanced by an equal reduction in thermal enthalpy (cp ΔT). Integrating cp dT/T = Rd dp/p to reference pressure p0 = 1,000 hPa defines Potential Temperature (θ):
θ = T (p0 / p)Rd/cp = T (1000 / p)0.286
which is conserved during dry adiabatic motion ((1/θ)(dθ/dz) = (1/T)(Γd − Γe)).
| Planetary Body | Dominant Atmospheric Gas | Surface Gravity g (m/s2) | Specific Heat cp (J kg−1 K−1) | Dry Adiabatic Lapse Rate Γd (K/km) |
|---|---|---|---|---|
| Venus | 96.5% CO2, 3.5% N2 | 8.87 | ~850–1,100 (depth-dependent) | ~8.0–10.4 |
| Earth | 78% N2, 21% O2 | 9.81 | 1,004.6 | 9.76 (~9.8) |
| Mars | 95.3% CO2, 2.7% N2 | 3.72 | ~735–830 | ~4.5–5.0 |
| Titan | 97% N2, 2.7% CH4 | 1.35 | ~1,040 | ~1.30 |
| Jupiter (1 bar) | 86% H2, 14% He | 24.79 | ~11,500–12,300 | ~2.0–2.1 |
The Moist Adiabatic Lapse Rate (MALR) and Clausius-Clapeyron Scaling
Once a rising parcel cools to its dew point at the Lifting Condensation Level (LCL), relative humidity reaches 100% (saturation specific humidity qs(T, p)). Further ascent condenses water vapor into cloud droplets, releasing the latent heat of vaporization (Lv ≈ 2.501 × 106 J/kg at 0 °C) into the parcel (δq = −Lv dqs > 0). Combining the First Law with the Clausius-Clapeyron equation (des/dT = Lv es / (Rv T2), Rv = 461.5 J kg−1 K−1) yields the Moist Adiabatic Lapse Rate (MALR, Γm):
Γm = Γd × [1 + (Lv qs) / (Rd T)] / [1 + (Lv2 qs) / (cp Rv T2)]
Because the denominator exceeds the numerator whenever qs > 0, Γm < Γd everywhere, and varies strongly with temperature:
- Warm humid tropics (T = 30 °C, 1,000 hPa, qs ≈ 27 g/kg): High latent heat release depresses Γm to ~3.6 to 4.2 K/km.
- Mid-latitude lower troposphere (T = 10–15 °C): Γm averages ~5.0 to 6.5 K/km.
- Cold upper troposphere and polar regions (T < −30 °C, qs → 0): Γm → Γd ≈ 9.5–9.8 K/km.
Atmospheric Static Stability and Foehn Dynamics
Static Stability Regimes and Brunt-Väisälä Frequency
Comparing the ambient Environmental Lapse Rate (Γe = −dTe/dz) against Γd and Γm defines four static stability regimes:
| Stability Regime | Mathematical Criterion | Potential Temperature Profile | Physical Response of Vertically Displaced Air Parcel |
|---|---|---|---|
| Unconditional Stability | Γe < Γm < Γd | dθ/dz > 0 (and dθe/dz > 0) | Both dry and saturated lifted parcels become colder and denser than surroundings (B < 0) and sink back, oscillating at the Brunt-Väisälä frequency N = √[(g/θ)(dθ/dz)]. |
| Temperature Inversion | Γe < 0 (dTe/dz > 0) | dθ/dz ≫ 0 (strong stratification) | Temperature increases with altitude (nocturnal radiative, marine subsidence, or polar inversions, plus the stratosphere), trapping surface smoke and urban PM2.5 smog. |
| Conditional Instability | Γm < Γe < Γd | dθ/dz > 0 but dθe/dz < 0 | Unsaturated parcels are stable (9.8 K/km > Γe), whereas saturated parcels are unstable (Γm < Γe). If lifted above the LFC, moist parcels erupt into deep cumulonimbus convection. |
| Unconditional Instability | Γe > Γd > Γm | dθ/dz < 0 (superadiabatic) | Both dry and moist lifted parcels remain warmer and less dense than surroundings (B > 0) and accelerate upward spontaneously (dry thermals, desert surface layers). |
Orographic Foehn and Chinook Warming
The difference between Γd and Γm drives warm, dry Foehn (Alps) and Chinook (Rockies) downslope winds. Moist air at z = 0 km (15 °C) forced over a 3.0 km ridge cools at Γd (9.8 K/km) to its LCL at 1.0 km (5.2 °C), then ascends from 1.0 to 3.0 km along the moist adiabat (Γm ≈ 5.5 K/km) to reach −5.8 °C at the summit while precipitating its moisture. Descending 3.0 km on the leeward slope as unsaturated air, it warms at the dry adiabatic rate (+9.8 K/km) (+29.4 °C), arriving at the valley floor at +23.6 °C—a net warming of +8.6 °C (ΔT = Δzcloud (Γd − Γm)) from windward latent heat release.
The Lapse-Rate Feedback in Global Climate Change
Tropical Negative Feedback vs. Polar Positive Feedback
The lapse-rate feedback (λLR) quantifies how vertical temperature gradient changes under warming alter outgoing longwave radiation to space, with opposite signs in the tropics versus the poles:
- Tropical negative feedback (cooling): Deep moist convection pins the tropical troposphere to a moist adiabat (Γm). As the surface warms, higher qs releases extra latent heat aloft, decreasing Γm and warming the tropical upper troposphere (200–300 hPa) 1.3 to 1.8 times as much as the surface, which radiates extra infrared energy (σT4) to space.
- Polar positive feedback (warming): In the Arctic, strong surface-based temperature inversions (Γe < 0) suppress vertical mixing, trapping warming from sea-ice loss within the lowest 500–1,000 m. Because cold upper air warms less than the surface, outgoing longwave radiation increases sluggishly, producing a positive polar lapse-rate feedback that drives Arctic amplification. Globally averaged, the tropical effect dominates, yielding λLR ≈ −0.5 to −0.8 W m−2 K−1.
Frequently Asked Questions
Why is the average environmental lapse rate (6.5 °C/km) different from the dry adiabatic lapse rate (9.8 °C/km)?
The Dry Adiabatic Lapse Rate (9.8 °C/km) applies only to an unsaturated air parcel moving rapidly up or down without heat exchange. The real troposphere's average Environmental Lapse Rate (~6.5 °C/km) is set by a global balance between radiative cooling to space (which cools the upper air and tries to steepen the lapse rate) and vertical heat transport by moist convection (4–6 °C/km, releasing latent heat when clouds condense) plus poleward baroclinic eddies in mid-latitude weather systems. Together, latent heat release and large-scale eddy transport warm the upper troposphere relative to the surface, stabilizing the global average profile near 6.5 °C/km.
Why does temperature stop decreasing and start increasing with altitude in the stratosphere?
Throughout the troposphere (0 to 10–17 km), the atmosphere is heated predominantly from below by solar-warmed land and ocean surfaces and cooled from above by infrared radiation from water vapor and clouds, driving convective overturning (Γe > 0). Above the tropopause, in the stratosphere (~12–50 km), the ozone layer (O3) directly absorbs incoming solar ultraviolet (UV-B and UV-C, 200–310 nm) radiation, heating the stratosphere from the top down. This creates a permanent temperature inversion (Γe < 0) where temperature rises from ~−55 °C at the tropopause to ~0 °C at the stratopause (50 km), suppressing vertical convection and capping tropospheric storm clouds into flat anvils.
How does the lapse-rate feedback contribute to Arctic amplification?
In the tropics, deep thunderstorms rapidly carry surface warming up to 10–15 km altitude (warming the upper troposphere more than the surface), where heat radiates efficiently to space (a negative, cooling lapse-rate feedback). In the cold Arctic, however, strong winter temperature inversions prevent vertical mixing. When greenhouse gases or sea-ice loss add heat to the Arctic, that energy stays trapped in a thin layer right next to the surface rather than warming the upper atmosphere. Because cold upper air radiates poorly to space (σT4), the Arctic surface must warm much more (3–4 times the global average) to restore radiative balance (a positive lapse-rate feedback).
References
- Wallace, J. M., & Hobbs, P. V. (2006). Atmospheric Science: An Introductory Survey (2nd ed.). Academic Press.
- Manabe, S., & Strickler, R. F. (1964). Thermal equilibrium of the atmosphere with a convective adjustment. Journal of the Atmospheric Sciences, 21(4), 361–385. https://doi.org/10.1175/1520-0469(1964)021<0361:TEOTAW>2.0.CO;2021%3C0361:TEOTAW%3E2.0.CO;2)
- Soden, B. J., & Held, I. M. (2006). An assessment of climate feedbacks in coupled ocean–atmosphere models. Journal of Climate, 19(14), 3354–3360. https://doi.org/10.1175/JCLI3799.1
- Pithan, F., & Mauritsen, T. (2014). Temperature feedbacks explain strongest Arctic amplification in climate models. Nature Geoscience, 7(3), 181–184. https://doi.org/10.1038/ngeo2071