Bounce Cast
A bounce cast is a symmetrical, spindle-shaped sole mark preserved on the underside of a sedimentary bed, formed when a saltating object grazes a mud bed at a low angle and rebounds without deep plowing.
A bounce cast (the positive sandstone cast of an erosional bounce mark) is a short, elongated, roughly symmetrical sedimentary sole mark preserved on the underside of turbidite sandstones and storm beds. It forms when a solid objectโsuch as a pebble, mudstone intraclast, shell, or piece of woody debrisโtransported in saltation by a turbulent current grazes a cohesive mud substrate at a shallow angle and rebounds cleanly back into the flow. Because the entry and exit angles of the grazing clast are nearly equal, the resulting depression and its overlying sand cast taper evenly at both ends, producing a canoe-like or spindle-shaped ridge.
Bounce casts belong to the continuum of tool marks alongside groove casts, prod marks, and skip marks. Unlike prod marks, which record steep upward extraction and yield a unidirectional paleocurrent vector, bounce casts are longitudinally symmetrical and therefore indicate only a bidirectional paleocurrent trend (lineation).
Mechanics of Grazing Impact and Rebound
The geometry of a bounce mark is governed by the ratio of horizontal advection velocity to vertical settling velocity, as well as the elastic and plastic properties of the mud surface. When a saltating clast travels near the base of a turbidity current along a flat trajectory (typically an impact angle under 15ยฐ), its downward momentum is modest relative to its horizontal speed.
Upon touching the cohesive mud, the tool compresses and displaces a shallow, narrow trough a few centimeters long and a few millimeters deep. Because the tool does not dig deeply enough to stall or pivot steeply, hydrodynamic lift and elastic bed reaction return it smoothly into suspension along an exit angle comparable to its entry angle. Subsequent deposition of sand from the waning current fills the shallow trough, preserving the bounce cast on the base of the overlying bed.
| Tool Mark Type | Contact Duration | Longitudinal Symmetry | Paleocurrent Output | Typical Length |
|---|---|---|---|---|
| Bounce Cast | Brief grazing contact | Symmetrical (tapers at both ends) | Bidirectional lineation | 3โ15 cm |
| Prod Cast | Oblique plunge and abrupt lift | Asymmetric (steep downstream face) | Unidirectional vector | 2โ12 cm |
| Skip Cast | Periodic series of bounces | Rhythmic linear train | Bidirectional (or weak vector) | 0.2โ2.0 m train |
| Groove Cast | Continuous sliding drag | Uniform linear ridge | Bidirectional lineation | 0.2โ5.0+ m |
Relation to Skip Marks and Brush Marks
Bounce marks rarely occur in isolation; they commonly transition into related saltation structures as flow turbulence or tool geometry varies:
- Skip marks: When a single clast bounces multiple times in succession before leaving the outcrop area, it leaves a straight, evenly spaced train of bounce marks known as a skip mark. Spacing between individual bounce casts reflects the saltation hop length of the clast under local shear velocity.
- Brush marks: If the mud substrate is slightly softer and more plastic than ideal for a clean bounce, the grazing tool pushes a small crescentic mound of displaced mud immediately downstream of the trough, creating a brush mark whose mud-pile mound breaks the symmetry and reveals the down-current direction.
- Roll marks: Elongated or disc-shaped clasts, such as ammonite shells or flat pebbles, may roll rather than rebound cleanly, leaving repeating geometric impressions along a straight line.
Field Identification and Geological Applications
In outcrop, bounce casts appear as short, sharp-crested or rounded spindle ridges projecting a few millimeters to roughly two centimeters downward from the base of sandstone beds. Their long axes align parallel to the mean flow path, making them reliable indicators of paleocurrent axis even when flute casts are absent. In structural geology, bounce casts also serve as simple way-up indicators, because their convex relief projects stratigraphically downward into the older mudstone layer.
Frequently Asked Questions
How does a bounce cast differ from a prod cast? A bounce cast tapers gently and symmetrically at both ends because the tool grazed the mud and rebounded smoothly, whereas a prod cast has a gentle upstream slope and a steep, blunt downstream face where the tool pivoted sharply upward.
Can bounce casts tell you which direction the current flowed? Not by themselves. Because a bounce cast is symmetrical along its long axis, it shows the line along which the current flowed (for example, northโsouth) but requires associated flute casts, prod casts, or brush marks to resolve the 180ยฐ directional ambiguity.
What causes a bounce mark to become a skip mark? A skip mark is simply a sequence of repeated bounce marks formed by the same saltating object hopping rhythmically across the mud surface multiple times.
References
- (2014). bounce mark cast. Dictionary Geotechnical Engineering/Wรถrterbuch GeoTechnik. https://doi.org/10.1007/978-3-642-41714-6_22847
- (2014). bounce mark. Dictionary Geotechnical Engineering/Wรถrterbuch GeoTechnik. https://doi.org/10.1007/978-3-642-41714-6_22846
- (2014). sole mark(ing). Dictionary Geotechnical Engineering/Wรถrterbuch GeoTechnik. https://doi.org/10.1007/978-3-642-41714-6_195498