Bounce Mark
A bounce mark (or bounce cast) is a small, symmetrical, spindle- or crescent-shaped sedimentary tool mark formed when a saltating object briefly grazes a cohesive mud bed and rebounds back into the current.
A bounce mark (preserved in positive relief on the underside of an overlying sandstone bed as a bounce cast) is a distinctive type of sedimentary tool mark created when a solid object carried in saltation by a turbidity current or storm flow briefly touches down on a soft, cohesive mud seafloor and immediately rebounds back into suspension. Named and classified within the classic sole-mark taxonomy of Stanisลaw Dลผuลyลski and E. K. Walton (1965), bounce marks are typically 1 to 10 cm long, 0.5 to 3 cm wide, and only a few millimeters to ~1 cm deep, displaying a smooth, symmetrical, spindle-shaped or crescentic longitudinal profile that tapers gently at both its upstream entry and downstream exit ends.
Because the impacting clastโsuch as a mudstone intraclast, shell fragment, pebble, or waterlogged wood chipโglances off the substrate at a low angle without plowing deeply or coming to rest, bounce marks record brief, elastic-like grazing contacts along the base of sediment-laden currents.
Mechanics of Saltation and Morphology
During sediment transport in a turbidity current (often within the lower Bouma TaโTb transition) or shallow-marine storm surge, coarse clasts larger than the ambient suspended silt travel near the bed in ballistic saltation hops:
- Low-angle touchdown: Descending at a shallow trajectory angle (typically 10ยฐโ25ยฐ), the clast compresses and shears a shallow trough into plastic marine mud.
- Symmetric rebound: Because forward momentum greatly exceeds downward normal force, the clast lifts cleanly back into the turbulent boundary layerโleaving a shallow depression whose widest and deepest point lies near the center, tapering symmetrically toward both ends.
- Skip marks (periodic series): When the same saltating clast touches down repeatedly at regular intervals downstream as it hops along the bed, it produces a linear train of evenly spaced bounce marks known as skip marks (or skip casts).
| Tool Mark Type | Contact Trajectory | Longitudinal Profile | Up-Current vs. Down-Current Asymmetry | Paleocurrent Output |
|---|---|---|---|---|
| Bounce Mark | Low-angle graze & rebound | Symmetrical spindle / canoe | Nearly symmetrical at both ends | Bidirectional axis (unless paired with prod/flute marks) |
| Prod Mark | Steep downward plunge & lift | Asymmetric wedge (steep down-current wall) | Blunt, steep downstream termination | Unidirectional vector |
| Brush Mark | Grazing touch with mud pile-up | Shallow trough + crescentic mud mound | Overturned mud ridge at downstream end | Unidirectional vector |
| Groove Mark | Continuous sliding/dragging | Long, uniform linear furrow | Uniform cross-section | Bidirectional lineation |
Field Recognition and Paleocurrent Analysis
On the sole (underside) of inverted or overhanging turbidite sandstone beds, bounce casts appear as short, smooth, canoe-like or almond-shaped positive bumps aligned parallel to the main paleocurrent trend. Unlike prod castsโwhose steep, blunt downstream face clearly points down-currentโan isolated bounce cast is often nearly symmetrical from end to end, yielding a reliable bidirectional paleocurrent lineation (axis of flow) rather than a unique one-way arrow. However, when bounce marks transition down-flow into skip marks or co-occur with flute casts, prod casts, and brush casts on the same bedding sole, geologists can resolve the full unidirectional transport vector across ancient deep-marine submarine fans.
Beyond paleocurrent mapping, abundant bounce and skip casts indicate moderate-to-high flow competence capable of lifting gravel- or shell-sized clasts into saltation while still preserving a firm, cohesive mud substrate beneath the passing current. When preserved in inverted tectonic beds, bounce castsโlike other positive sole markingsโalso provide reliable way-up (geopetal) indicators, confirming stratigraphic younging toward the overlying sandstone unit. Moreover, the spacing between successive skip casts along a bedding sole offers a direct empirical record of the saltation hop length (typically 5โ30 cm) of individual clasts near the base of ancient turbidity currents, constraining near-bed shear velocity and sediment concentration during depositional bypass.
Frequently Asked Questions
How is a bounce mark formed on the seafloor? A bounce mark forms when a pebble, shell, or mud clast hopping along in a current (saltation) briefly touches a soft mud seafloor and rebounds back into the flow, leaving a small, smooth, symmetrical indentation that is later filled with sand.
What is the difference between a bounce mark and a skip mark? A bounce mark is a single isolated grazing impact, whereas skip marks are a linear series of evenly spaced bounce marks carved by the same clast hopping repeatedly downstream.
Can a bounce cast tell you which direction the current flowed? Because bounce casts taper symmetrically at both ends, an isolated bounce cast usually gives only the line (axis) of flow; geologists pair them with asymmetric flute casts or prod casts to determine the exact one-way direction.
References
- Ivan P. Colburn (1967). Grain Fabrics in Turbidite Sandstone Beds and Their Relation to Sole-Mark Trends on Same Beds: ABSTRACT. AAPG Bulletin. https://doi.org/10.1306/5d25b81b-16c1-11d7-8645000102c1865d
- Colburn, I. P. (1968). Grain fabrics in turbidite sandstone beds and their relationship to sole mark trends on the same beds. Journal of Sedimentary Research. https://doi.org/10.1306/74d71901-2b21-11d7-8648000102c1865d
- BULL, P. A. (1978). Surge mark formation and morphology. Sedimentology. https://doi.org/10.1111/j.1365-3091.1978.tb00334.x