Brush Mark
A brush mark (or brush cast) is a unidirectional sedimentary tool mark formed when an object skimming across soft mud pushes up a small crescentic ridge of displaced mud at its downstream end before lifting back into the flow.
A brush mark (preserved on the base of an overlying sandstone bed as a brush cast) is an asymmetric, unidirectional sedimentary tool mark carved when a solid or semi-plastic object transported near the base of a turbidity current or storm flow brushes tangentially across a very soft, water-rich mud seafloor. Unlike a bounce mark—which cleanly rebounds from a firmer mud bed leaving a symmetrical depression—or a prod mark—which plunges steeply downward—a brushing object skims forward along the mud surface, plowing a shallow furrow and piling up a small, overturned crescentic ridge of mud at its down-current termination before lifting back into the flow.
When sand from the overlying turbidite subsequently fills the scour and wraps over the small mud ridge, the preserved brush cast displays a shallow, tapering up-current nose followed by a slightly deeper, rounded depression terminated by a diagnostic overhang or crescentic rim at the downstream end—providing an unambiguous unidirectional paleocurrent indicator.
Formation Mechanics and Substrate Rheology
The transition among groove, bounce, prod, and brush marks reflects subtle interplay between tool trajectory angle, current shear velocity, and mud substrate rheology:
- High water content, soft mud: For a brush mark to form, the upper few millimeters of seafloor mud must be soft and plastic enough to deform by viscoplastic bulldozing rather than brittle fracturing or purely elastic rebound.
- Shallow grazing contact: A clast, twig, or shell fragment descending at a low angle skims briefly along the bed, bulldozing a tiny bow-wave of mud ahead of it.
- Downstream mud pile-up and lift-off: As fluid lift forces carry the tool upward again, the pushed-up crescentic mud mound remains frozen at the downstream end of the mark, often slightly overhanging the scour pit. In cast form on the sole of a sandstone bed, this mud mound appears as a curved indentation (hollow) or lip immediately down-current of the raised sand cast.
| Diagnostic Feature | Brush Cast (Sole of Sandstone) | Prod Cast (Sole of Sandstone) | Flute Cast (Sole of Sandstone) |
|---|---|---|---|
| Carving Agent | Solid tool skimming soft mud | Solid tool plunging at steep angle | Fluid eddy (no solid tool) |
| Downstream End | Crescentic ridge / mud-mound hollow | Steep, blunt, flat-faced step | Smooth, tapering flare |
| Upstream End | Shallow, gently tapering groove | Gently sloping ramp | Deep, bulbous, steep heel |
| Flow Direction | Points toward the mud-mound lip | Points toward the blunt steep wall | Points away from the steep bulbous heel |
Geological Context and Facies Associations
Brush marks are especially common on the soles of thin-to-medium-bedded classical turbidites (Bouma Tb–Tc and Tc–Td divisions) in deep-marine flysch basins (such as the Carpathian Flysch where Dżułyński and Walton originally documented them, as well as California and Alpine turbidite fans). Because brush marks require both saltating/near-bed tools and soft, unconsolidated mud, they frequently occur alongside chevron marks, bounce marks, and delicate trace fossils, recording distal-to-medial fan environments where bottom shear is gentler than in proximal gravel-scouring channels.
Careful field orientation—distinguishing the up-current groove from the down-current displaced-mud crescent—allows sedimentologists to determine exact one-way paleoflow azimuths even in beds lacking cross-lamination or flute casts. In addition, experimental flume reproductions by Dżułyński and Simpson (1966) using settling plaster-of-Paris suspensions confirmed that subtle differences in water content and clay cohesion control whether a grazing clast leaves a bounce mark, a brush mark, or a prod mark along the same depositional flow path—making sole-mark assemblages sensitive gauges of seafloor consolidation prior to turbidite arrival.
Frequently Asked Questions
How can you tell which way the current flowed from a brush cast? Look for the small crescent-shaped ridge or hollow formed by bulldozed mud: that displaced mud pile always sits at the downstream end of the mark, so the current flowed from the shallow tapering groove toward the mud mound.
Why does a brush mark form instead of a bounce mark? Brush marks form when a tool skims a softer, more water-rich mud surface that piles up ahead of the grazing object, whereas bounce marks form when a tool rebounds cleanly from a slightly firmer substrate without pushing up a mud ridge.
Are brush marks carved by water eddies or by solid objects? Brush marks are tool marks carved by solid objects (such as pebbles, shell fragments, or plant debris) carried near the bed, unlike flute marks which are scoured by turbulent fluid eddies alone.
References
- Ivan P. Colburn (1967). Grain Fabrics in Turbidite Sandstone Beds and Their Relation to Sole-Mark Trends on Same Beds: ABSTRACT. AAPG Bulletin. https://doi.org/10.1306/5d25b81b-16c1-11d7-8645000102c1865d
- Colburn, I. P. (1968). Grain fabrics in turbidite sandstone beds and their relationship to sole mark trends on the same beds. Journal of Sedimentary Research. https://doi.org/10.1306/74d71901-2b21-11d7-8648000102c1865d
- (1965). Sedimentary Features of Flysch and Greywackes. Developments in Sedimentology. https://doi.org/10.1016/s0070-4571(08)x7035-9x7035-9)